Real-world tips and process walkthroughs to help you make smarter manufacturing decisions—quickly and confidently.
The AS resin refers to an acrylonitrile-styrene copolymer. Generally containing 15%-50% styrene which makes AS resin hard, transparent, and easy to process, [...]
Jetting, also known as jet marks or jet salivation, refers to the products that occur 65 depending on the streamline in [...]
A hot runner system can be considered as an extension of injection molding machinery. The hot runner system delivers thermoplastic melt [...]
Viscosity is one of the most important basic factors of plastic processing, is the quantitative expression of fluidity. Viscosity is affected [...]
The plastic injection molding process mainly includes four stages: filling, pressure maintaining, cooling, and demoulding. These four stages are a completely [...]
The granules supplied tend to contain varying degrees of moisture, fluxes, and other volatile low molecular substances, especially the hygroscopic TPR moisture [...]
Mold polishing is the process of polishing the cavity surface of the mold by using a whetstone, sandpaper, polishing paste, wool [...]
Bi-color injection is based on IMD technology. It is a combination of two colors injected onto an object, usually with black [...]
Injection molding is the plastic raw material after granulation, dying, adding additives, and other processing of granular materials) into the cylinder, [...]
