A Brief Introduction Of AS Resin Injection Molding Technology
The AS resin refers to an acrylonitrile-styrene copolymer. Generally containing 15%-50% styrene which makes AS resin hard, transparent, and easy to process, and acrylonitrile makes [...]
The Common Auxiliaries Agent For Plastic Processing
Auxiliaries agents are various auxiliary chemicals that need to be added in the production or processing of some materials and products to improve the production [...]
How The Jetting Produces On The Plastic Injection Molds
Jetting, also known as jet marks or jet salivation, refers to the products that occur 65 depending on the streamline in the gate, mostly [...]
A Brief Introduction Of Heat Runner Mold System
A hot runner system can be considered as an extension of injection molding machinery. The hot runner system delivers thermoplastic melt adiabatically near or [...]
The Factors Influence Viscosity Of The Flowing Melt Plastics In The Injection Mould
Viscosity is one of the most important basic factors of plastic processing, is the quantitative expression of fluidity. Viscosity is affected by melt temperature, [...]
Plastic Injection Molding Process: Filling, Pressure, Cooling, Demoulding
The plastic injection molding process mainly includes four stages: filling, pressure maintaining, cooling, and demoulding. These four stages are a completely continuous process, which [...]
3 Tips Of TPR Injection Molding Process
The granules supplied tend to contain varying degrees of moisture, fluxes, and other volatile low molecular substances, especially the hygroscopic TPR moisture content which [...]
How Many Methods Of Mold Polishing Do You Know
Mold polishing is the process of polishing the cavity surface of the mold by using a whetstone, sandpaper, polishing paste, wool wheel, etc., to [...]
