Real-world tips and process walkthroughs to help you make smarter manufacturing decisions—quickly and confidently.
Have you often seen this advice: choose an aluminum mold for low-volume production and a steel mold for high-volume production? There [...]
In product design and manufacturing, part edges are rarely left as sharp right angles. Chamfers, fillets, and bevels all modify edge [...]
During ejection, an injection-molded part must overcome the gripping force caused by material shrinkage, friction between the part and the mold, [...]
In the periodic table, there is a group of elements that show some characteristics of both metals and nonmetals. These elements [...]
After reading our previous comparison of two-shot injection molding and overmolding, you may already have made your choice: if two-shot injection [...]
Does your product need to combine rigid plastic with a soft material, but you're unsure whether to choose overmolding or two-shot [...]
In our previous article, Living Hinge Design Guide, we mentioned that fillets can effectively reduce stress concentration and extend the service [...]
Injection molding is not a single technique, but rather a group of related manufacturing processes. Which variant is most suitable depends [...]
Although a living hinge may appear to be nothing more than a simple thin-wall connection, its actual service life is influenced [...]
