Real-world tips and process walkthroughs to help you make smarter manufacturing decisions—quickly and confidently.
In product design and manufacturing, part edges are rarely left as sharp right angles. Chamfers, fillets, and bevels all modify edge [...]
During ejection, an injection-molded part must overcome the gripping force caused by material shrinkage, friction between the part and the mold, [...]
In the periodic table, there is a group of elements that show some characteristics of both metals and nonmetals. These elements [...]
After reading our previous comparison of two-shot injection molding and overmolding, you may already have made your choice: if two-shot injection [...]
Does your product need to combine rigid plastic with a soft material, but you're unsure whether to choose overmolding or two-shot [...]
In our previous article, Living Hinge Design Guide, we mentioned that fillets can effectively reduce stress concentration and extend the service [...]
Injection molding is not a single technique, but rather a group of related manufacturing processes. Which variant is most suitable depends [...]
Although a living hinge may appear to be nothing more than a simple thin-wall connection, its actual service life is influenced [...]
There is no universal standard for wall thickness in injection molded parts. Walls that are too thick can lead to sink [...]
