Rapid prototyping is a set of techniques for rapidly creating a physical item or assembly scale model using a 3D CAD (computer-aided design). The produced part is then assembled using 3D printing. RJC provides the following 3D printing services;

3D Architecture

There are several sorts of three-dimensional architectural models that are employed. RJC specializes in making these, and we can work with you to discover the ones that are best suited to your requirements.

3D Printed Architecture Model

Once we have developed a model design, we may create three-dimensional printed reproductions for you.

The digital model can then be brought to life, allowing us to provide you with a physical depiction of your building that you can pick up, touch, and change as needed.

3D Model Painting Service

We understand that you must have it accurately painted to get the most out of your printed three-dimensional model. We make sure that our pricing is industry-competitive.

If your budget is limited, we can work with you to find a solution to afford our painting services.

3D Model Moving Service

We understand how significant your models are, and we want to do everything we can to protect them. We know that if you must relocate, you are concerned about shipping your model. You are worried that it will be harmed during transport.

We can assist you in transferring your model if you require it. We have been doing this for the longest time, and our knowledge puts us in a great position to safely assist you in transferring your model.

Benefits Of Rapid Prototyping Service

In the modern era of innovation, ideas come from anywhere and everywhere. Rapid prototyping offers companies a cost-effective way to produce multiple products early in the design cycle quickly. In turn, this allows for a variety of benefits, including:

In the early stages of the manufacturing and design process, the ability to paint a complete picture of how a product will look or perform is very important. Changes or upgrades can also be made earlier in the process, saving both time and money.

Rapid prototyping is a low-cost technique to prototype things because it is an automated process that requires minimal labor to run. The RP procedure is also quite exact.

Using computer-aided design reduces material waste and eliminates the need for specialized tools to prototype each new product.

Designers can use RP to show fresh concepts to board members, clients, investors, and others. When these concepts are presented using Rapid Prototyping, the audience may absorb and understand the concept and development much more quickly.

This visualization also enables designers to receive consistent real-time input from customers and clients.

The ability to minimize design problems with a limited volume rapid prototype run aids in the elimination of costly design flaws that may not even be discovered during early assessments.

The Cost Of Rapid Prototyping

Rapid Prototyping costs is one of the most common questions we get asked. Typically, different methods result in varying levels of quality and expense.

Choosing the proper manufacturing method is thus the key to cost. For most prototyping manufacturing, 3D printing, for example, is a more cost-effective option than CNC milling.

In most circumstances, only one machining process is required to complete a single part, although it may require at least two ways in some cases.

As a result, calculating the actual cost for a prototype case is a difficult task.

Another way to phrase it is, there is no set price.

When you send the design drawing to various prototyping manufacturing facilities, you may receive a varied estimate since the quotation engineer must examine all cost criteria.

However, it is incorrect to believe that prototyping quotation is a personal work.

We can figure out the most cost-effective manufacturing method for your project, and thus the most cost-effective price.

RJC follows some quote criteria and examines all parameters. Several factors influence the price, including:

  • What kind of product do you want to create using a prototype?
  • Whether or whether you have a ready-to-prototype design.
  • What is the goal of your prototype?
  • The volume or size of the pieces being manufactured.
  • The product’s surface finish.
  • The materials that were used to create the prototype.
  • How much will post-production processing be required?

To establish the cost of your prototype, you must first determine where you are in the process. Here are some examples of several stages of the product development process:

Stage 1: Concept Design

This preliminary stage focuses on research and the selection of a prototype that will imitate user experience.

User interface mock-ups, foam models, virtual 3D renderings, and beautiful models are examples of prototypes typically created during this stage.

The expenditures are relatively modest at this stage, starting at about $1,000, and the design can usually be done in less than a week.

Stage 2: Bench Model

Engineering prototypes that quantify choices for making design judgments.

At this stage, prototypes can be scale models of the product or hand-built proof-of-concept models.

The costs at this level are low, but they are dependent on the amount of customization required for subsystems and user validation metrics.

These costs typically begin around $5,000 for bench model prototype testing and supplies.

Stage 3: Prototype And Test

During this stage, an alpha prototype is created that is fully functioning.

During this stage, costs are moderate and vary based on the complexity of the product and the amount of output.

Depending on the required bespoke parts, electronics, and fidelity, the cost of the alpha prototype materials can range from a few hundred to thousands of dollars.

Stage 4: Manufacturing Setup

A production parts prototype ready for manufacture will be built during this stage and an early-stage entirely manufactured item.

This stage’s costs begin at about $30,000 for essential items and can rise depending on the extent of the manufacturing process, volume, and development time required.

How To Reduce The Cost Of Rapid Prototyping

Now that you’ve seen the primary factors that influence fast prototype prices let’s look at some approaches to cut quick prototyping expenses.

  • Select The Appropriate Machinery And Materials

The first technique in rapid prototyping to save money is to employ the appropriate machinery and materials used in prototyping.

To do so, you’ll typically need to consider your prototype’s aims.

For example, if you only need a simple model to provide proof of concept, your equipment requirements will be much different than if you need a working prototype that looks like the actual thing.

Furthermore, for a basic model, you are unlikely to use materials that are specifically developed for high-quality finishes and precise detailing.

So, once you’ve determined your prototype’s purpose, you’ll be able to select the appropriate machinery and materials according to your demands and specifications.

  • Appropriate Scheduling

Let’s be honest: the more efficient you are, the more money you save. There are a few strategies to increase your efficiency when rapid prototyping.

During the day, you could, for example, produce smaller parts. Because they usually take less time to make, you can finish a few during the day.

The production of more significant parts can therefore be scheduled to run overnight. You might even explore combining numerous elements into a single build.

In this manner, you’ll ensure that you’re as efficient as possible while also considering increasing your productivity.

  • Streamline Post-Processing

As previously said finishing can significantly impact expenses and require a significant amount of time and work.

While specific methods create parts that need minor post-processing than others, all details will likely require some post-processing.

  • For More Significant Parts, Use Multiple Pieces.

More oversized items typically take longer and cost more to produce. As a result, it makes sense to divide more significant sections into smaller pieces that can be made quickly and cheaply.

In this case, you can integrate characteristics into the design that will allow these parts to align during assembly automatically.

  • Make Hollow Parts

Unlike subtractive manufacturing, where you’ll lose a lot of material if you build an item hollow, additive manufacturing allows you to accomplish this and save you money in the process.

  • Optimize Design

Design complexity can be a significant contributor to overall expenses. As a result, you’ll want to optimize your design to save money and time. In layman’s words, optimizing your design ensures efficient fabrication.

  • Minimize Failures As Much As Possible

Failures can put you back, requiring you to spend time and money to get back on track. As a result, you’ll want to avoid broken machinery and failed parts as much as feasible.

Final Thoughts

Investigate through the cost characteristics listed above, and you will discover the most cost-effective design for your prototyped parts.

For years, the items manufactured by RJC have been of the finest quality and yielded the best results.

We invite you to contrast our quality and service with those of any other manufacturer.

You can quickly and easily determine your rapid prototyping manufacturing requirements.

We can assist you in resuming the development of a game-changing product.

Some of the most important clients in the industry hire us because we provide excellent service and a high-quality product.

Contact us immediately to receive the best in the Scale Model Building business.